Welcome visitor you can login or create an account.
Categories

Technical Furniture

Technical Furniture

Display: List / Grid
Show:
Sort By:
4-20mA loop calibrator
  This station provides all simulation and 4-20mA loop control possibilities for sensors, regulators, PLC inputs, etc. Compressed air is provided through 4mm quick sockets. A digital display indicates the pressure from 0 to 10,000mbar. This type of station can be easily customised. All types of electrical and mechanical modifications can be considered. Several options are possible. Components and features o..
£19.95
Antivandalism cover with key
  This pull-down cover in front of the electrical equipment in the console prevents students from scribbling on or vandalising the front and its equipment. Standard dimensions: 1200mm and 2000mm. Other dimensions upon request. ..
£19.95
Asynchronous motor start-up kit
  Male and female HARTING industrial rapid connectors, with mobile covers and fixed bases, are supplied with the KIT. They are used for connections between the following: wiring grid - push-buttons - switches - lamps - motor. The KIT is supplied with detailed instructions, wiring diagrams, manufacturer’s instructions and a parts list. This industrial kit comprises actuators and control components which are used..
£19.95
BA13 economy system
  Objective: No longer replace the complete BA13 plate but only a small rectangle. Principle: • Cut out a rectangle in a space which is often used (space for a switch, or another item) then screw the fixed frame into the BA13. • Insert a scrap cutting of BA13 for the students work. • Screw the movable frame using a single screwdriver. ..
£19.95
Basic benches
High temperature stratified top (40 mm) Height of the bench : 840mm (top included) A PVC protective pad is placed underneath each foot. Maximum load 1000kg uniformly distributed. ..
£19.95
Benches with leg-mounted cabinet
  • High temperature stratified top (40 mm). Maximum load 1000kg • Height of the bench: 840mm (top included) • Cabinet with 5 drawers (4 drawers H100mm + 1 drawer H300mm ..
£19.95
Benches with shelves & consoles
  • High temperature stratified top • Shelf with: 4x power sockets + 1x circuit breaker + 1x indicator light • Shelf adjustable in height: maximum 400mm (depth: 400mm) • Height of the bench: 1240mm (shelf included). Maximum load 1000kg uniformly distributed ..
£19.95
Chairs & stools
The chairs and stools are fitted with plastic pads. They are also available with casters  (except ASS-D). Contact us. ..
£19.95
Compact educational/living unit
  This living space model is designed to be fitted in areas like stairwells or studio entrances. The student can wire up lights, entry phone fittings and mains network distribution standpipes, etc.Its window and door enable the student to simulate alarms and the detection of smoke from fires. The BA13 plaster plates are of a standard format. 2500 x 1200mm. With a view to keeping shipping costs to a minimum, this cubicle ca..
£19.95
Cross-shaped operating area
  Completely stand-alone and self-supporting structure which can accommodate standard-format BA13 plaster panels without any drilling being required. A single screwdriver will be sufficient for fitting or replacing the plaster panels. Each wing of the structure measures approximately 1200mm and can accommodate standard plaster panels. • The suspended ceiling comprises 4 detachable BA13 panels (supplied), measuring ..
£19.95
Data benches as you like
  Make your own computer workbench by choosing additional items in this page. Computer hardware not supplied. ..
£19.95
Drawer cabinet
  MAIN FEATURES • Sturdy drawer cabinets in steel for an intensive use. • Furnace-baked epoxy paint : grey housing, pearl grey drawers • Width : 720mm / Depth : 645mm / Height : 1000mm • Maximum load by drawer : 100 kg • Total weight : between 150 and 160 kg according the model • Handles with label holder DESCRIPTION OF THE DRAWERS • Drawers with ball bearing slides. A safety device allows the opening o..
£19.95
Educational & Manufacturing workstation
  DESCRIPTION OF THE P1 STATION (SINGLE-PHASE OR 3-PHASE) ref. P1-LGS (with 2 single-phase consoles)  Supplied without grid / plate / Partition The P1 workstation is a wiring bench for two users, with a free area for storing the necessary tools and diagrams. The station can take any of the following: perforated grids, plaster partitions (13mm) and honeycomb partitions. Grids and partitions are fixed instan..
£19.95
Electrotechnical benches
  Range of stand-alone, complete and reliable bench. This equipment complies with laboratory international safety standards. It is made up of 1 or 2 electrical cabinets locked by key, connected by a foot rest. The top of dimensions 2000 x 750 mm in standard is stratified. All outputs are equipped with safety terminals 4mm (Supplies & Loads). ..
£19.95
Flat screen supports
  • Attached to edge of table by locking pliers with a tightening screw for a table thickness between 15 and 100mm. The attachment consists of a 400mm high support pole fitted with a sliding ball joint to adjust the height of the screen. • Built-in cable guide • Supplied with 4 screws for the monitor • For flat screen monitors up to 15 kg • Attached to edge of table by locking pliers with two ..
£19.95
Hanging drawers
HANGING DRAWERS (300 SERIES) WITH LOCK AND KEY ..
£19.95
Industrial computeur trolley
  FEATURES OF THE WORKSTATION • High-temperature stratified bench-top 40mm thick PVC bench-top edges • Cage type CPU holder With anti-theft bar at the front. • 1 complete stand (epoxy paint) including: Two single H type feet 3 cross rails including 1 foot rest 4 casters Ø100mm including 2 with brakes • 1 flat screen support arm Table edge attachment between 15 and 100mm thick. 400-mm high po..
£19.95
Leg mounted cabinet for benches
  • The drawers are mounted on ball bearings so they slide easily and silently. They are removable so drawers can be switched around or sorted. • The lock secures all the drawers at the same time. In standard, all keys are identical. Different keys can be available upon request. • Drawers with a height of 300 mm are suitable for standard hanging folders. ..
£19.95
Loads for renovation project
  This new technical leg design offers you the option to create a new station or to renovate existing tables. Thanks to its compactness it can act both as a table leg and as an item next to a table. This AXG** (* represents power) product is completely autonomous. With a simple three-phase mains input + neutral + earth, it can provide all the power supply combinations provided in the table below. Supplied assembled ..
£19.95
Mobile workstation for industrial computer
  FEATURES OF THE WORKSTATION • High-temperature stratified bench-top 40mm thick PVC bench-top edges • Cage type CPU holder With anti-theft bar at the front. • A sliding keyboard/mouse holder in the corner • 1 complete stand (epoxy paint) including: Two single H type feet 3 cross rails including 1 foot rest 4 casters Ø100mm including 2 with brakes • 1 flat screen support arm Table edge attac..
£19.95
Multi-purpose workstations
  It is a single, fully-equipped electric-powered station which complies with current standards and is ready to be connected to the electric network. The start-up systems and connection terminals are installed on an electrotechnical console. There are many standard configurations, and these can be modified easily on simple application. All workbenches have a key-operated “EMERGENCY STOP” button for autonomous positive safe..
£19.95
Option RJ45 wired
  Combination of 2 RJ45 connectors connected together in the console. The side connector A is used to connect the network input, the front connector B is for the user's connection. ..
£19.95
P2 station
  This P2 workstation is a workbench that is designed for two users, with extensive usable space. All of the distributed alternative sources comply with standards. The horizontal strip at the back of the bench-top can be positioned on the right or left depending on your preferences. COMPONENTS AND FEATURES OF THE STATION • stand-alone power distribution strip (see description  opposite) • Fro..
£19.95
P3 station
  The P3 workstation is a workbench that is designed for two users, with extensive usable space. The electrical distribution includes alternating and direct current sources in accordance with standards. The horizontal console at the back of the bench-top can be positioned on the right or left depending on your preferences. COMPONENTS AND FEATURES OF THE STATION • stand-alone power distribution..
£19.95

Copyright Adams Lab 2013