Pressure & Volume Controllers
Pressure and Volume Controllers
Display: List / Grid
The GDS Advanced Pressure/Volume Controller (ADVDPC) is a general-purpose water pressure source and volume change gauge for the precise regulation and measurement of fluid pressure and volume change. The ADVDPC may be used with water, oil or air. Available in pressure ranges from 100kPa to 8000KPa and a volumetric capacity of 200cm3, or up to 2000kPa with avolumetric capacity of 1000cm3 Features & Benef..
Normally, the feedback to the main control circuit board comes from the internal pressure transducer. However, this input could come from a different source, such as a remote transducer. GDS has developed this into an elegantly engineered enhancement which is the Remote Feedback Module (RFM). Features & Benefits The RFM enables the output of an external transducer to be measured and displayed by the controller.  ..
The GDS Enterprise Level Pressure/Volume Controller (ELDPC) is a general-purpose water pressure source and volume change gauge for the precise regulation and measurement of fluid pressure and volume change. The enterprise level controller is aimed at commercial testing and is available in one configuration, 1MPa pressure and 200cc volume. Liquid (normally deaerated water) in a cylinder is pressurised and displaced by a piston movi..
The GDS Advanced Pressure/Volume Controller (ADVDPC) is a general-purpose water pressure source and volume change for the precise regulation and measurement of fluid pressure and volume change. The advanced version offers the highest level of accuracy, resolution and control and is the defacto standard for research devices. The high pressure version is available in pressure ranges from of 8MPa to 150MPa and a volumetric capacity of 200cm3. Hig..
The GDS Infinite Volume Controller (IVC) is designed to remove constraints of volume capacity such that a test can continuously flow fluid under pressure control or volume control. When using a single pressure/volume controller, once the volumetric capacity of the barrel has been reached (either 100% full or 100% empty), the user is required to manually fill or empty the controller accordingly. By connecting two GDS pressure/volu..
The GDS pneumatic controller is an economical source of computer controlled regulated air pressure control. The controller regulates an external pressure source such as a compressor or compressed air cylinder to provide a controlled output pressure. The control of the valves is via the Serial bus (RS232) from the PC and software. Features & Benefits A built in pressure transducer measure..
The GDS Standard Level Pressure/Volume Controller (STDDPC) is a general-purpose water pressure source and volume change gauge. Aimed at medium pressure commercial testing (<=3MPa), undergraduate teaching and research, the standard controller is the mid level controller from GDS. Available in 200cc only, but with pressure ranges from 100kPa to 4MPa (default is 3MPa). Features & Benefits The STDDPC..
Showing 1 to 7 of 7 (1 Pages)