Welcome visitor you can login or create an account.
Categories

Cleaning, Care, Aids

Display: List / Grid
Show:
Sort By:
Adhesives and sealants: Araldite® Rapid
Araldite® Rapid Two component all-purpose glue, made with an epoxid-resin base. Glues practically everything except PP, PE, PTFE, PVC and Acryl. Fast setting, heat resistant up to +100 °C, resistant against alcohol, water, petrol, mineral oils and similar substances. Mixing 1:1. Process of setting starts after 5 min, will support itself after another 15 mins and is fully st..
£19.95
Adhesives and sealants: Electro insulation tape
Electro insulation tape Made of high-gloss PVC, synthetic rubber adhesive. Heat resistant from -10 to 105 °C. Resistant to moisture, oil, diluted acids and alkalis, as well as UV radiation. Penetration resistance 40 kV/mm. Good adhesive force and high flexibility, elongation at break ≥ 160 %, tear strength 18.0 N/mm². Width 19 mm, thickness 0.19 mm, roll length 20 m, weight 100 ..
£19.95
Adhesives and sealants: Foam tape
Foam tape Double-sided self adhesive, made of polyurethane. For fixing down surfaces to prevent slipping, or as a stick-on tape for pin-up boards, posters, etc. Slightly stretchable, good adhesion, and is easy to remove. Width 25 mm, 0.8 mm thick.   Article Pack Qty.    ..
£19.95
Adhesives and sealants: Hot glue gun
Hot glue gun For professional gluing. Made of plastic, handy and lightweight. With PTC heating element. VDE tested. Power supply 100/240 V. Extension cord 150 cm. With 3 jets and instruction manual. With glue sticks, type 1500  Synthetic, for almost all materials. Good flowing and adhesive properties, unlimited shelf life. Softening point a..
£19.95
Adhesives and sealants: Hot glue gun Gluematic 5000
Hot glue gun Gluematic 5000 Cordless hot melt applicator with extremely high melting capacity. Very short heating times Glue is heated automatically when the unit is placed onto the charger Electronic temperature control using state-of-the-art PTC heating technology Continuous operation with power cable possi..
£19.95
Adhesives and sealants: O-ring set from Loctite®
O-ring set from Loctite® Ideal for making different sized O-ring seals. Work pack with approx. 20 g special glue, cutter, 1 m elastic bands each with Ø 1.6; 2.4; 3.0; 5.7 and 8.4 mm and instructions. Drying time for rings approx. 10 min.   Article Pack Qty.    ..
£19.95
Adhesives and sealants: One components silicone rubber Scrintec® 600, oxime cross-linking
One components silicone rubber Scrintec® 600, oxime cross-linking For gluing, sealing, covering. High temperature stability, virtually chemical resistant. UV/ozone resistant. Polymerizes at room temperature through air humidity to a permanently elastic rubber. Ready- to- use in tubes of 85 ml.   Scrin..
£19.95
Adhesives and sealants: One components silicone rubber Scrintec® 901, acetic acid cross-linking
One components silicone rubber Scrintec® 901, acetic acid cross-linking For gluing, sealing, covering. High temperature stability, virtually chemical resistant. UV/ozone resistant. Polymerizes at room temperature through air humidity to a permanently elastic rubber. Ready- to- use in tubes of 85 ml.   ..
£19.95
Adhesives and sealants: PTFE flat sealing tape
PTFE flat sealing tape Self-adhesive, for pipe connections and other surfaces. Soft, easily adaptable, smoothes out irregularities. Temperature range: -240 to +270 °C. Pressure range: up to 120 bar. Vacuum leakage rate for helium: 1.3 x 103 mbar/s at 20 N/m2. Surface pressure. DVGW-approved. Width 3.0 mm, 1.5 mm thick. ..
£19.95
Adhesives and sealants: PTFE thread sealant tape
PTFE thread sealant tape Lubricant substitute. Protects, seals and secures all types of thread. Highly flexible, usable from -190 to +260 °C. Chemically inert. Tape width 12 mm, thickness 0.08 mm. Roll length 12 m.   Article Pack Qty.    1715.1 3 r..
£19.95
Adhesives and sealants: Roti® coll 1
Roti® coll 1 One component-instant glue. Made with a cyanoacrylate basis, for plastic, metal and porcelain parts. Glued parts are mostly temperature and chemical stable. Not suitable for constant contact with water. Hardens in less than 1 min, fully hardened after 8-10 h by polymerization under catalytic influence of humidity.   Warning..
£19.95
Adhesives and sealants: Sekuroka®-snap fastening
Sekuroka®-snap fastening Self-adhesive, flexible. With interlocking semi-spherical heads  (62 heads/cm2). Provides extremely secure and resilient connections to most materials with high, permanent adhesive power. Approx. 5.8 mm thick when closed. Length 230 mm, width 25.4 mm.   Article Pack Qty..
£19.95
Adhesives and sealants: Sekuroka®-velcro fastening
Sekuroka®-velcro fastening Easily removable, consists of loop and hook components with self-adhesive back. Fastener is closed by gently pressing hooks into the loops. Ideal for applications where a high ammount of opening and closing is expected. Approx. 2.5 mm thick when closed. Length 230 cm, width 25.4 mm.   Article ..
£19.95
Adhesives and sealants: Temperature stable adhesive tapes
Temperature stable adhesive tapes Self-adhesive tape. Ideal for extreme temperatures. Temperature stable from -196 to +287 °C. Suitable for use in the cryo sector, incubators, autoclaves, sterilizers, etc. Surface with textile finish, can be marked.   Article Width (mm)  Length (m)  ..
£19.95
Adhesives and sealants: tesaband® Premium
tesaband® Premium Fabric tape, 25 mm wide. Wear and tear resistant. Good adhesion even on rough surfaces. Can be written on. Temperature resistant up to +130 °C.   Article Pack Qty.    1263.2 1 roll (25 m)      ..
£19.95
Adhesives and sealants: Two component -silicone rubber, set
Two component -silicone rubber, set For liquid- proof sealing and to produce moulds. Properties. density 1.17 g/cm3. Viscosity 6 000 to 10 000 cP. Hardens into an elastic substance after adding hardener. Mostly solvent resistant. White, can be mixed colour pigments. Shelf life 1 year, unmixed. Temperature stable up to +230 °C.   ..
£19.95
Adhesives and sealants: Two component -silicone rubber, silicone rubber hardener
Two component -silicone rubber, silicone rubber hardener For liquid- proof sealing and to produce moulds. Properties. density 1.17 g/cm3. Viscosity 6 000 to 10 000 cP. Hardens into an elastic substance after adding hardener. Mostly solvent resistant. White, can be mixed colour pigments. Shelf life 1 year, unmixed. Temperature stable up to +230 °C. &n..
£19.95
Adhesives and sealants: Two component sealing resin Metaflux®
Two component sealing resin Metaflux® Suitable for metal, porcelain, wood, stone, for sealing pipes and tanks, and for filling holes and dents. Hardens after 3 hours. Temperature stable up to +200 °C. Mechanically processible. Compression-/tensile strength 800/300 kp/cm2. Mixture 1:1. i   R: 36/38-43-52/53 S: 28-37-61 ..
£19.95
Aids: Boiling pebbles made of PTFE
Boiling pebbles made of PTFE Irregularly formed granulate. Prevent uncontrolled overheating of solutions during warming up of volatile liquids. Resistant and inert against most aggressive chemicals (acids, bases, hydrocarbons). Doesn‘t scratch glass and leaves no powdery deposits.  Maximum working temperature +260 °C. Granules 1 to 5 mm. ..
£19.95
Aids: Boiling pebbles, resistant
Boiling pebbles, resistant For preparative and analytical operations in biochemistry, biotechnology, microbiology, microanalysis, etc. Can be used in vacuumes and in high-vacuum distillation, even with minimal amounts of liquid. Do not abrade or absorb solvents, are immediately effective after every interruption. Are also suitable for strong acids, bases, aggressive solvents and..
£19.95
Aids: Boiling pebbles, Sort A
Boiling pebbles, Sort A Ensure even simmering and boiling and steady distillation of low viscosity liquid under standard pressure and slightly water jet vacuum.   Type A: for standard distillation. Natural stone product mainly made of quartz. Contains small amounts of iron. Granules are approx. 5-8 mm. ..
£19.95
Aids: Boiling pebbles, Sort B
Boiling pebbles, Sort B Ensure even simmering and boiling and steady distillation of low viscosity liquid under standard pressure and slightly water jet vacuum.   Type B: for ananlysis. Natural, alkalic alumosilicates, without ceolit. Granules are approx. 5 mm. &nb..
£19.95
Aids: Gas-leak tester Roth
Gas-leak tester Roth Special liquid for finding smallest leaks in tubing or hollow spaces that are under gas or air pressure. Nontoxic, non-inflammable, non-corrosive. Tested according to DIN 30657 and approved according to DVGW 85.01616. Spray possible leakage area. Bubbles appear at site of leak.   Article Pa..
£19.95
Aids: Glass beads
Glass beads Reflex beads made of soda-lime glass. Specific weight approx. 2.5 g/cm3. Technical Specifications:  Apparent density depending on size 1.46-1.51 kg/l. Refraction index 1.5188. Chemical composition: SiO2 72.5 %; Na2O 13.0 %; K2O 0.2 %; CaO 9.6 %; MgO 4.22 %; Al2O3 0.58  % Fe2O3 0.11 %. ..
£19.95

Copyright Adams Lab 2013